Zhejiang Homebase Industrial Co., Ltd.
Steel Towel Warmer, Electric Heated Towel Rail
-
- 3 2 1
- A completely independent electric towel rail requires only a 10-16amp and 110 -250V fused spur electric connection in close proximity.
The connection is available in two formats.
OPTION 1
The most popular format for electric towel rails is the one filled with thermal transfer fluid which is heated by an electric immersion heater located at the bottom of the towel warmers and radiators. The immersion heater is a sealed cartridge and therefore can be easily changed in case of failure.
OPTION 2
(Dry lined electric) Many of the towel warmers illustrated can also be supplied for electric operation, employing a silicon cored resistance wire which is threaded through the inside of the tubing during manufacture. However, only relatively low wattage heat outputs are attainable, in case of failure the towel warmer needs returning to the manufacturer for a replacement of heater core.
-
-
Electric Heated Towel Rail HB-R55 Series (Material:Brass)
A completely independent unit requiring only a 10-16amp and 110 -250V fused spur electric connection in close proximity.
More>>
-
-
Electric Heated Towel Rail HB-R56 Series (Material:Brass)
HB-R5602C (Material: Brass)
(Dry lined electric towel rails)
Many of the towel warmers can also be supplied for only electric operation, employing a silicon cored resistance wire which is threaded through the inside of the tubing during manufacture. However, only relatively low wattage heat outputs are attainable(60Watts-120Watts). In case of failure the towel warmer needs returning to the manufacturer for a replacement of heater core.
More>>
-
-
Electric Heated Towel Rail HB-R57 Series (Material:Brass)
A completely independent unit requiring only a 10-16amp and 110 -250V fused spur electric connection in close proximity.
There are two format electric towel rails, available in our company.
More>>
-
-
Electric Heated Towel Rail HB-R58 Series (Material: Brass)
(Dry lined electric towel rails) Many of the towel warmers can also be supplied for only electric operation, employing a silicon cored resistance wire which is threaded through the inside of the tubing during manufacture. However, only relatively low wattage heat outputs are attainable. In case of failure the towel warmer needs returning to the manufacturer for a replacement of heater core.
More>>
- 3 2 1